Net10 Wireless offers 4G LTE supported SIM connections and 4G supported devices. If you don’t want to buy a mobile set from Net10 Wireless, you can only buy a 4G supported SIM connection. It doesn’t offer any contract-based telecom services. Net10 Wireless is immensely popular among users due to the high-quality wireless services and low prices.
The 2G, 3G, and 4G network frequencies for Net10 Wireless are the following.
For 2G Network Net10 Frequencies are: GSM 1900 MHz, CDMA-1900 (Maximum)
GSM 850 MHz, CDMA-850, CDMA-800 (Minimum)
For 3G Network Net10 Frequencies are: UMTS 1900 MHz, CDMA-1900 (Maximum)
UMTS 850 MHz, UMTS 1700 MHz, UMTS 2100 MHz, CDMA-850, CDMA-800 (Minimum)
For 4G Network Net10 Frequencies are LTE Band 12 700, LTE Band 17 700, LTE Band 4 1700/2100, LTE Band 13 700, LTE Band 25 1900, LTE Band 26 850, LTE Band 41 2500, LTE Band 2 1900, LTE Band 5 850, LTE Band 30 2300, LTE Band 29 700.
The network coverage frequencies vary from location to location. These are not the same countrywide.
Net10 APN Settings for Internet & MMS
The following are the general APN settings you need to configure in your handset. If you don’t configure these settings, you can’t access the internet and MMS.
Settings | Values |
---|---|
APN | wap.tracfone |
Port | 8080 |
MMSC | http://mms.tracfone.com/ |
APN type | default,admin,mms |
Protocol | IPv4/IPv6 |
Net10 APN Settings for AT&T 4G LTE
You can use the following APN settings to use AT&T 4G LTE services on your handset. Make sure, you add these settings as they are. These are case sensitive settings. So, don’t miss any comma, dash, or dot.
Settings | Values |
---|---|
APN | tfdata |
Proxy | proxy.mobile.att.net |
Port | 80 |
Proxy | proxy.mobile.att.net |
MMSC | http://mmsc.mobile.att.net |
MMS proxy | proxy.mobile.att.net |
MMS proxy port | 80 |
APN type | default,mms,supl,hipri |
Authentication Type | PAP |
Protocol | IPv4 |
Net10 APN Settings for AT&T Tracfone
The users with AT&T Tracfone and Net10 Wireless should use the following APN settings to their handsets to access the internet and MMS services.
Settings | Values |
---|---|
APN | tftdata |
MMSC | http://mmsc.mobile.att.net |
MMS Proxy | proxy.mobile.att.net |
MMS proxy port | 80 |
APN Type | default,mms,supl,hipri |
Authentication Type | PAP |
Net10 APN Settings for Tracfone
The users of the Tracfone wireless network with Net10 can use the following APN settings to create the accurate Access Point Names. Restart your handset when you have done with the settings.
Settings | Values |
---|---|
APN | tftdata |
MMSC | http://mms-tf.net |
MMS Proxy | mms3.tracfone.com |
MMS proxy port | 80 |
APN Type | default,mms,supl,hipri |
Authentication Type | PAP |
Net10 APN Settings for MMS via Tracfone
Check here the APN settings you require to create an Access Point Names for MMS services of Net10 via Tracfone.
Settings | Values |
---|---|
APN | wap.tracfone |
Port | 8080 |
MMSC | http://mms.tracfone.com |
MMS Proxy | 216.155.165.40 |
MMS proxy port | 8080 |
APN Type | default,mms,supl,hipri |
Authentication Type | PAP |
Net10 APN Settings for Internet & MMS [Android]
If you have an Android handset, you can use the following APN settings to access the Net10 internet and MMS.
Open the “Settings” and tap “Connections.”
Tap the category “Mobile Networks” from there.
Open the “Access Point Names” and select “Add” to create a new Access Point Names for your handset.
Category | Settings |
---|---|
APN Name | Net10 2 |
APN | wap.tracfone |
Proxy | |
Port | 8080 |
Username | |
Password | |
Server | |
MMSC | http://mms.tracfone.com/ |
MMS proxy | |
MMS port | |
MCC | 310 |
MNC | |
Authentication type | |
APN type | default,admin,mms |
APN protocol | IPv4 |
APN roaming protocol | IPv4 |
Enable/disable APN | APN Enabled |
Bearer | Unspecified |
APN PPP phone number | Not set |
Net10 APN Settings for Internet & MMS [Windows]
Windows users with Net10 wireless telecom services can configure the following APN values in the given fields. Check the instructions below in this context.
Tap “Settings” on the app list.
Select here the “Network & Wireless” category.
Tap “Cellular & SIM” from here.
Select the “Cellular” category.
Here, you need to select the SIM card you are currently using.
In the “Internet APN” category, select “Add an Internet APN” to add new APN Settings.
Category | Settings |
---|---|
Profile Name | Net10 2 |
APN | wap.tracfone |
Username | |
Password | |
Type of sign-in info | |
IP Type | IPv4 |
Enable | Type your Mobile operator here |
Proxy server (URL) | |
Proxy Port |
Net10 APN Settings for MMS [Windows]
Now, return to the “Cellular” category in Settings.
Open its “Properties.”
Tap the “MMS APN” and select “Add an MMS APN” from here.
Now, add the following values to the given fields.
Category | Settings |
---|---|
Profile Name | Net10 2 |
APN | wap.tracfone |
Username | |
Password | |
Type of sign-in info | |
IP type | IPv4 |
Proxy server (URL) | |
Proxy port | |
MMSC (URL) | http://mms.tracfone.com/ |
MMSC port | |
Maximum MMS size (KB) | 2048 |
Save the settings and restart your handset to apply the changes.